4 Digit 7 Segment Serial UART Clock Timer Display RED Arduino

Description

The module is a 0.56'' LED four digit display (size 70×20×15mm), for installation in other equipment as a component or individual use. The module contains an integrated independent clock and an up/down timer, that provides seconds, minutes and hours of the synchronization signals. For connecting with the MCU or other devices the UART interface is used.
Without limitations you can create your own characters and save them to any of the ASCII code (with the exception of spaces and numbers). Characters are permanently stored in the internal EEPROM memory.
Applications:
Clock with a timer
Devices information and control display
Process duration counter
Features:
20 steps visually linear brightness setting (with instantaneous or smooth change)
Individual character creation and preservation
Independent clock setup, displaying and hiding, without affecting the existing characters
Independent up/down timer setup displaying and hiding without affecting the existing characters
Caret displaying (one or more characters are displayed in the warp)
Decimal representation of a 16-bit binary number to a specified number of characters
Simple character displaying (sending the corresponding ASCII code) and sending commands (1-4 bytes)
Power voltage 3.3-5V without affecting the brightness of the display
3 interrupt lines (hour, minute, second)
Download the Datasheet in PDF format here.
Download a ZIP file containing the SoftIB Serial Communicator freeware application with a demonstration command file here.
Each order is shipped with a traceable tracking code.
Watch the demonstration of the device here.