DIY Kit TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling Syst A7T7

Description

DIY Kit TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling Syst A7T7
With the wide applications of semiconductor cooling, more and more DIY enthusiasts are interested in it.It's a question that how to make refrigerating capacity to a more great extent in water cooling applications.This DIY kit could be just to your taste.
Adopt TEC1-12706 semiconductor chilling plate, good quality for use.
Complete sealed structure, isolating the moisture in the air.
Higher reliability than others.Lightweight and mini in size, easy to install.
Great DIY kit for electronic enthusiasts in semiconductor cooling applications.
Semiconductor Chilling Plate: TEC1-12706
Size: 40 x 40 x 3.75mm
Internal Resistance: 2.1~2.4 Ohm
Max. Temperature Difference: 67 Celsius Above
Rated Voltage: 12V(Vmax. 15V, Starting Current 5.8A)
Working Current: Imax.= 4~4.6A(Rated 12V)
Refrigeration Power: Max. 50~60W
Working Environment: -55~83 Celsius
Sealing Process: Standard 704 silicon rubber sealing all sides
Fan: DC 12V
Conduction Module Size: 60 x 45 x 21mm
Water Block Size: 40 x 40 x 12mm
Fan Size: 40 x 40 x 10mm
e: The conduction cool module can frost when the temperature is under -25 Celsius.
TEC1-12706: one side with words is the refrigeration side, the other side is heat dissipation side.
Must install heat sink or water-cooled radiator on the heat dissipation side; otherwise will burn the Peltier.
The DC power is included in this kit, please prepare it by yourself.
colour: silver
Material: metal
Package included:
1 x Conduction Module
1 x Water Block
1 x TEC1-12706
1 x Thermal Grease
1 x Fan
1 x Base Board
1 Pack Screws
Only the above package content, other products are included.
e: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.