MSA 91590 RED Comfo-Cap Mining Hard Hat Cap 4-Point Staz-On® Suspension

Description

MSA RED Comfo-Cap Mining Hard Hat Cap 4-Point Staz-On® Suspension 91590 NEW!
Item # COMFO-CAP LOG-MSA91590
**IT DOES NOT SIT AS LOW AS THE OLDER VERSION/DESIGN OF THIS HARDHAT**
**LIGHT IS
NOT
INCLUDED**
*****DIRECT FROM THE MANUFACTURER MSA - PLEASE NOTE THIS CAP MEETS ALL OSHA REQUIREMENTS:
MSA Comfo-Cap® Staz-On® Protective Cap With Staz-On® Suspension PER OSHA APPROVAL IS CONSIDERED low-crown clearance to work in low-ceiling areas
along with a convenient lamp cord and bracket. It has cross ridges on crown to provide enhanced strength and rigidity.  It comes in standard 6 - 1/2" to 8" sizes. It comes in a variety of colors and sizes.
It comes in a white, yellow, gray, blue, orange, green, red and black colors.
It is widely used in the mining industry due to its low-profile
.
It is designed for used if lateral protection is desired and is not specifically designed to provide protection against lateral blows from the front, side or rear. It complies or exceeds all applicable requirements for a Type I top impact helmet as outlined in electrical low voltage ANSI Z89.1-2003, Class G.
Lamp bracket and cord holder to support miners lamp. Peak protects wearers eyes and face from small falling objects. Helps resist top impacts. Molded cross ridges on the crown provide increased strength and rigidity. For use in the mining industry. Style: Front-Bill Cap; Material(s): Polycarbonate.
Global Product Type
: Hard Hats
Style
: Front-Bill Cap
Material
: Polycarbonate
Adjusting Method
: Staz-On® Pin-Lock
Weight
: 1.09 lbs
Suspension
: Staz-On® Pin-Lock
Color
: Black
Manufacturer Measurements:
Front of Brim to Back of Hat is 11-1/8"
Side to Side is 8"
5.56" High
Markets: Mining
Applications: Asbestos Abatement, Confined Space, Food Processes, Manufacturing, Painting, Sanding & Grinding, Working at Heights