-40%

MT-11 measurement and control instrument display displacement two alarm points

$ 81.22

Availability: 30 in stock
  • MPN: MT-11
  • UPC: 573852520243
  • Return shipping will be paid by: Seller
  • Restocking Fee: No
  • All returns accepted: Returns Accepted
  • Brand: Unbranded
  • Item must be returned within: 60 Days
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Condition: New

    Description

    MT-11 measurement and control instrument display displacement two alarm points reset function voltage and current RS485 output optional
    model:
    Only show with reset
    Two alarm points
    Voltage output
    Current output
    RS485
    Pulse output (optional cable)
    】Product Introduction
    MT-11 series displacement digital display meter is used for the display and control of displacement sensor analog signal, optional transmission function or communication function, connected with single chip computer, PLC, inverter and so on to form a complete measurement control system. The digital display measurement and control instrument has:
    Multiple signal input functions (resistance, voltage, current, etc.), automatic calibration and manual calibration functions, zero point clear function, upper and lower limit alarm function, 24V external power supply function. Optional output signal transmission function, digital communication function, printing function, etc. The design of the input signal and output signal of the digital display is isolated, with strong anti-interference ability and high reliability.
    D〉Technical indicators
    Basic error: 0.2%FS, 14-bit A/D converter (maximum 18-bit A/D converter, indicated when ordering).
    Input signal: DC voltage signal: matching resistance output displacement sensor (conventional model); voltage: 0-5V, 0-10V, 1V-5V, m/etc (input impedance ≥1MQ); current: 0-20mA, 4 -20mA etc. (input impedance≤250Q)
    Sampling period: 0.2S (10-200 times/sec, user selectable)
    Display: single row of four LED digital tube display
    Alarm output: The instrument can have multiple relay outputs, and the relay contact capacity is AC220V/5A or AC220V/1A. Can bring up to 16 relays, can choose upper limit, lower limit control, control set value and return difference value.
    Transmitter output: 4-20mA, 0-20mA (load resistance ≤250Q, please indicate if the load is too large);
    1-5V, 0-5V, 0-10V (load resistance ≥200KQ).
    Communication output: isolated communication interface RS485/RS232 baud rate 1200-9600bps
    Print output: RS232 interface, TTL interface.
    External power supply (feeding output): DC24V/30mA (conventional model), DC12V/30mA
    Displacement digital display table MT-11 series
    Temperature compensation: 0~50 cold junction temperature automatic compensation, error: ±1℃
    Power supply voltage: AC220V or DC24V
    Power consumption: 4W
    Ambient temperature: -20~70°C (after starting the machine for 30 minutes at normal temperature, it can gradually withstand the extreme temperature)
    Relative humidity: ≤85% without condensation to avoid use in corrosive and flammable and explosive gases
    Panel size: 96mm×48mm (conventional model), 160mm×80mm, 96mm×96mm, 72mm×72mm,
    48mm×48mm
    Example: Read the PV (PV=1000) value of the instrument with address 1
    The sent data is 010300000001840A and the returned data is 01030203E8B8FA (of which 03E8-1000, integer data does not have a decimal point, if the decimal point dot is 2, the data is divided by 100), 01 is the instrument address, 03 is the function number, 00, 00 are from the register The starting address, 00, 01 means reading a number, 84, 0A is the check code, B8FA is the check code in the returned data. If you want to read the PV and J1HA data, you can send 010300000002C40B. When writing J1HA=1234, send data 0106000104d25a97. Note that when the input signal is a thermocouple signal and the decimal point is 1, the measured value format is one digit after the decimal point, and the alarm value and alarm reset value do not have decimal places.
    Packing: 1PC
    Warranty period: 120
    售前客服
    coco
    lily
    售后客服
    linda
    mico
    工作时间
    周一至周五:9:00-21:00
    周六至周日:0:00-24:00
    明星宝贝
    明星宝贝
    本周热销
    K72 监控配件 半球双灯摄像头阵列灯板 50米红外补光 晶元芯42MIL
    ¥
    10.90
    FY-WA4监控摄像头 新海康四灯点阵列红外线灯板 辅助补光外壳灯板
    ¥
    15.90
    商品分类
    查看所有商品
    按销量
    按新品
    按价格
    按收藏
    成品摄像头
    无线网络摄像头
    CMOS芯片
    索尼CCD芯片
    AHD同轴高清芯片
    室内电源
    室外电源
    红外/白光灯板
    镜头/镜头座
    支架
    外壳
    双绞线
    拾音器
    BNC/DC头
    各类线材
    其他配件
    宝贝排行榜
    热销排行
    热销排行
    新品快报
    Top1
    ¥
    15.90
    收藏
    监控摄像头机 C4 四灯点阵列红外线灯板辅助补光外壳灯板配件
    Top2
    ¥
    15.90
    收藏
    FY-AB4 监控摄像头 C5 四灯点阵列红外线灯板 辅助补光 外壳灯板
    Top3
    ¥
    15.90
    收藏
    FY-WA4监控摄像头 新海康四灯点阵列红外线灯板 辅助补光外壳灯板
    Top4
    ¥
    12.50
    收藏
    监控摄像头配件 90阵列灯板 晶元42MIL 超亮度 夜视50米红外灯板
    Top5
    ¥
    11.90
    收藏
    监控
    热卖宝贝
    价格说明
    划线价格
    指商品的专柜价、吊牌价、正品零售价、厂商指导价或该商品的曾经展示过的销售价等,
    并非原价
    ,仅供参考。
    未划线价格
    指商品的
    实时标价
    ,不因表述的差异改变性质。具体成交价格根据商品参加活动,或会员使用优惠券、积分等发生变化,最终以订单结算页价格为准。
    商家详情页(含主图)以图片或文字形式标注的一口价、促销价、优惠价等价格可能是在使用优惠券、满减或特定优惠活动和时段等情形下的价格,具体请以结算页面的标价、优惠条件或活动规则为准。
    此说明仅当出现价格比较时有效,具体请参见《淘宝价格发布规范》。若商家单独对划线价格进行说明的,以商家的表述为准。
    邻家好货
    1/3
    LED遥控网红发光秋千户外公园 游乐活动吊椅庭院花园休闲月亮灯
    ¥
    228.00
    ¥
    300.00
    新款丰田汉兰达 皇冠 凌志智能遥控钥匙卡2110型号智能钥匙7990卡
    ¥
    900.00
    ¥
    900.00
    古造复古油蜡皮双肩包男真皮背包头层牛皮书包休闲简约旅行电脑包
    ¥
    498.00
    ¥
    798.00
    平安 YS-PA3310B 消防防爆壁挂广播 灰色/红色/白色现货
    ¥
    279.90
    ¥
    279.90
    安全提示:
    交易中请勿使用
    阿里旺旺
    以外的聊天工具沟通,不要接收
    可疑文件
    和不要点击
    不明来源
    的链接,支付前核实好域名和支付详情。 淘宝不会以订单有问题,让您提供任何
    银行卡

    密码

    手机验证码
    !遇到可疑情况可在钱盾“诈骗举报”中进行举报,
    安全推荐
    推荐安全软件:
    钱盾
    UC浏览器
    内容申明:
    淘宝为第三方交易平台及互联网信息服务提供者,淘宝(含网站、客户端等)所展示的商品/服务的标题、价格、详情等信息内容系由店铺经营者发布,其真实性、准确性和合法性均由店铺经营者负责。淘宝提醒用户购买商品/服务前注意谨慎核实。如用户对商品/服务的标题、价格、详情等任何信息有任何疑问的,请在购买前通过阿里旺旺与店铺经营者沟通确认;淘宝存在海量店铺,如用户发现店铺内有任何违法/侵权信息,请立即向淘宝举报并提供有效线索。
    aranty period: 120 days
    On Jun-09-20 at 20:46:16 PDT, seller added the following information: