OS MAX engine Open Rocker OS 90 FS Old 60 ABEC3c3 Bearings OS 65 VRM WEBRA T-46

Description

We only sell Quality Premium Grade ABEC3 or better upgrade Hi Speed Bearings and for only a couple dollars more than the common unknown spec or abec1 rated low grade soft metals general use Bearings, our Premium Bearings are all correct C3 Clearance for heat in Model Nitro/Gas Engines, we only sell True Sealed Bearings, Not the old leaky shield type. We get our Bearings from proven reliable US Bearing Suppliers. We have Fast US Shipping from USA
(INFO) ALL INTERNATIONAL SHIPPING,  we still pay the extra Ebay Shipping Fee we get charged plus Bubble Mailers, Packing Supplies, Print Ink & Paper and Misc. Plus our Insurance, so please bear with us we don't like the high cost of International Shipping any more than you, we do our best and have no other options except at much higher price shipping options. (Note) Int. Shipping can take 2 to 5 weeks due to multiple carriers sorting and Customs delays.
((NOTE INTERNATIONAL SHIPPING))), some Countries have Customs Fees that they can charge you when your order arrives, we don't know if or what they charge so check with your Postal Customs Service before buying if you don't know to avoid surprises.
(Printed BEARING Installation guide, Tips and 4 Stroke Timing instructions)
I'm VeriSign and PayPal Verified . I've been on Ebay 22+ years, PayPal's Money Back Guarantee.
I've rebuilt over 800 Model Engines if you need Help just email me.
Fitment For This BEARING SET
OS ENGINES FS 90 (OLD)
OS ENGINES FS 60
OS ENGINES FS 60 Open Rocker
OS ENGINES VR-M MARINE 65
WEBRA 4-C ROTARY T46
The listing is for
(2) NEW PREMIUM ABEC3/C3 Upgrade BEARINGS
.
((( 6001 ))) ID 12mm x OD 28mm x Width 8mm Dimensions
((( R6 ))) ID 0.3750in x OD 0.8750in x Width 0.2812in Dimensions
You are buying (1) SET (2) Premium Grade ABEC3 BEARINGS with correct C3 Bearing clearances with Printed installation Instructions .
If you don't see your engine listed email me, I have sets for most engines.
(1) REAR HCHEMQ/USBB PREMIUM ABEC3/C3 HC Chromium Steel Deep Groove High Speed Full Metal Cage open bearing (Note) if you want all sealed email before paying. Most engines use open rear bearings.
(1) FRONT HCHEMQ PREMIUM ABEC3/C3 Deep Groove High Speed Full Metal Cage HC Chromium Steel with Buna Seals with high temp Mobil Grease (Options/Fully Sealed , Open or Seal on One Side) Ships Sealed.
In the past most engines just used a shielded front bearing, they leak, let dirt and moisture in, most new engines use these upgraded sealed type.
I only sell Premium ABEC3 with correct C3 clearances, recently manufactured industrial Bearings, no seconds, at the best prices with fast and Free USA SELLER 21 Years US Shipping Free, shipped from the US with Instructions and Tips in English to help with your rebuild.
Why Settle for Econo or Standard abec1 low grade bearings that are often rough, gritty even new and most likely won't stand the test of time.
Premium RC Bearings for Radio Control, Free Flight, Marine, Heli, Vintage and Control line engines in stock.
We are a Top Rated Ebay Verified 5 Star rated seller 22+ years 100% Feedback with fast Customer Service.
Thanks again to all our regular and new Customers for our 5 Star Seller.Com Rating.
Engine BEARING Care and storage info.
Why pay or 40 dollars for low grade or no grade factory bulk bearings that don't last long compared to Premium Industrial Grade ABEC3/C3 High Speed Bearings, get some spares if you leave fuel in your engine they will need replaced after they gum up or turn into a ball of rust, you can save buying a new engine by replacing gummy or rusted, stuck, rough or loose bearings before they come apart and damage the piston, head and sleeve. Save $$$ New Premium ABEC3/C3 Bearings make a big difference in engine performance. I always remove the fuel line and idle the engine dry, then put in marvel mystery oil or after run oil and spin it over, for long tern add liberal amounts of After Run Oil and cap off carb and exhaust, if the engine sets for a long time Not properly oiled it may appear to turn smoothly but some of the time the bearings aren't even turning, then when started the crank spins in the inner bearing race, not good.