Soldering Station Infrared Portable BGA Rework Tips Welding Tools LED Display

Description

Soldering Station Infrared Portable BGA Rework Tips Welding Tools LED Display
Description
Auto standby
when it doesn't work for a long time. you can set idle time (0-30) minutes, then the soldering station will enter the standby mode. the handle keep work during the standby mode. pressing the encoder switch, it will enter the sleep mode.
Auto sleep
power off time-0-30minute. entering the sleep mode, the soldering iron stops heating.
Aluminum alloy design
portable metal soldering station, compact design, light weight, has a long service life.
Adjustable temperature soldering tation
the adjust range is 200-450 ℃， the best working temperature is 330-380℃
Quick heat up function
quick heat up time < 8 seconds, when the handle isn't move, the handle will automatically sleep.
Product parameters
Model no: T12 digital soldering station Input voltage: AC100-240V
Output votage: DC 12-24V
Power:24v 4A/6A
Soldering iron temperature range:200-450℃
The melting time:6-8s
Auto sleep:yes
Auto standby:yes
Soldering iron handle with soldering iron tips
1:110cm pure silicone handle line professional electrical level soft and comfortable
2:split design easy to replace
Power switch prompt light
light will show when the switch is turn on, safe tips,
Fuse: use only A 250V fuse
silicone base installation: the silicone base is anti- slip, anti-resisant, durable, and easy to operate.
Package
soldering station
*1pc soldering tips
*2pc soldering iron handle
*1pc
adopter
cable
*1pc silicone base installation 1pc soldering stand
*1pc soldering sponge
*1pc
Basic operation
press and hold the encoder button and turn it on again to enter the paramter set mode. there are 9 menus for setting p00,p01,p02,p03,p04,p05,p06,p07,p08,p09,p10,p11,p12.
P00
P00-restore default prameters(0 or 1,default value 0,0 is not restored, 1 is recovery)
P01
p01-op amp gain(200-350 times, step 1,default value 270,)
P02
p02-op amp offset voltage(0-250mv, step 2, default value 100,which means that the soldering iron head maintains the output voltage inherent to the room temperature op amp, if you do not measure, please keep the default value p03-increase the ttemperature, adjust the temperature ,30-50 ℃ )
P03
if you do not measure, please keep the default value p03-increase the ttemperature, adjust the temperature ,30-50 ℃ )
P04
p04-temperature adjustment step(0,1,2,5,10 degrees optional, 0 can lock the soldering iron temperature)
P05
p05-sleep time(0-60 minutes,step 1 is 0, the sleep function is disabled)
P06
p06-shutdown time(0-180 minutes, step 1 at 0-30,step 10at 30-180, disable function when 0)
P07
p07-temperature correction(-30+ 30 degrees,step 1)(because the ntc resistor is in the chassis, the soldering station will cause the detacted ntc temperature to be higher than the room temperature, resulting in high compensation of the cold junction of the thermocouple, and the temperature of the soldering iron is not accureate. it can be corrected with this parameter. fro example ,if the detected soldering iron temperature is 20 degrees higher than the actual value,set this paramter to 20)
P08
po8-wake-up mode (0,1,0 means that the encoder can be rotated in the shutdown mdoe and the handle can be awakened by the vibration handle. fro 1, only the rotary encoder can wake up )
P09
p09-temperatue plus strength(llight click on the encoder to error to enter the temperature for the shdden need to weld the solder joint)
P-10
p-10 temperature enhancement time (enhanced time...)
P-11
p-11 buzzer switch(o means off 1 means on)